Remote Access; Setting The Security Code - Motorola M802C Guía De Usuario

NOTE
When the Answering Machine is full,
ANSWERER MSG will toggle within 2 seconds with
need to delete some messages to free up the memory.
4.20.9

Remote access

Remote access allows you to operate your Answering Machine and listen to your messages
by calling from external line.
To turn the remote access on/off
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then VOL+ or REDIAL/VOL- to select
4. Press MENU to confirm the setting.
To remotely access your answering system from external line, you need to key in 4-digit
security code at the external terminal (default code is 0000).
After entering the remote access mode, press the following keys to carry out your desired
function.
Press... To...
1 Press once to repeat the current message from the beginning.
Press twice to play the previous message.
2 Play/Stop the current message playback.
3 Skip forward to the next message.
4 Toggle Answer Off/Announce Only/Announce and Record modes.
5 Delete the message.
7 Listen to the Main Menu (for Full Voice prompts only).
4.20.10

Setting the security code

This is used to change the remote access PIN if necessary.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then enter the 4-digit security code.
4. Press MENU to save the setting.
Using the cordless phone
will flash if there are new messages.
MEMORY FULL. If this message is seen, you will
ANSWER
REMOTE
ON or OFF.
ANSWER
SECURITY
ERASE SOME
MACHINE.
ACCESS.
MACHINE.
CODE.
39