1
Scroll to Inside Clock (main screen) or Outside Clock
(external display) and press
2
Scroll to Digital 12 for a 12-hour clock, Digital 24 for a
24-hour clock, Analog for a dial clock, or Off for no
s
clock, and press
restore phone
Reset all options except unlock code, security code,
and lifetime timer:
Find it: s
u
>
Settings > Phone > Security
1
When prompted, enter the four-digit unlock code
(see page 22) and press Done.
2
Scroll to Restore Phone and press
3
Confirm that you want to reset the phone by
scrolling to Yes and pressing
4
When prompted, enter the four-digit unlock code
(see page 22) and press Done.
30
personalize
s
.
.
s
.
s
.
The screen does not change while the phone
resets all options. After a few seconds, the phone
turns off and then turns back on.
AGPS & your location
Your phone uses the Automatic Location Information
(ALI) feature, along with AGPS satellite signals, to tell
the network where you are physically located.
When ALI is set to Location > On (Do Not Ask) or On (Always Ask)
your phone shows the
may use your known location to provide useful
information (for example, driving directions, or the
location of the nearest bank). Your phone prompts you
when the network or a service asks for your location.
You can refuse at this point.
When ALI is set to Location > Off (E911 Only), your phone
P
displays the
(ALI off) indicator, and the phone does
not send location information unless you call the
emergency phone number (such as 911).
O
(ALI on) indicator. Services