Tabla de contenido
Publicidad
Instalación del Cable USB Estándar
1. Remove the 12 acorn nuts securing the back panel to main housing.
2. Remove a gland connector from the back panel. Refer to Figure No. 2 for illustration of
connector layout.
3. Slip the cable through the hole in the rear panel and into the enclosure.
4. Plug the USB cable into the USB-B connector P6. See Figure No. 15 for the location of P6.
8200-M585-O1 Rev B 210 Instalación & Técnico
22
Publicidad
Tabla de contenido
