Using the Radio
Selecting a Radio Station:
1. Press the Radio button to choose FM/AM.
2. Select a radio station using the Track/Tune (-/+) buttons.
Note: If there is poor AM reception, disconnect AC power for optimal AM radio reception. To
further adjust AM reception, move the entire unit.
Saving a preset:
1. Press the Radio button to choose FM/AM and select a radio station that you want to save
to a preset location using the Track/Tune buttons.
2. Press and hold Play/Pause for 3 seconds. A preset number will appear on the screen.
3. Use the Track/Tune buttons to select which preset you want to save it to.
4. Press Play/Pause to confirm. "SAVE" will appear on the screen.
Selecting a preset:
While the radio is on, press Play/Pause to cycle through the saved presets.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source, musical
instrument, or microphone. Also, try to reduce the overall volume of Sport using the Master
Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
If there is poor AM reception: Disconnect AC power for optimal AM radio reception. To
further adjust AM reception, move entire unit.
If you can't hear the microphone over the music volume: Turn down the music volume
from your source.
If you can't play music from a flash drive: The USB port is only for charging USB devices.
7