Maintenance
Calibrating the Scale
If the scale has been moved or flipped upside down, it must be calibrated
to ensure accurate results.
1.
Place the scale on a hard, flat surface.
2.
Step on the scale with 1 foot until digits appear on the display
[Figure
2.1]. Then, step off.
3.
The scale will show " " while calibrating, then "
complete
[Figure
Figure 2.1
Cleaning the Scale
•
Use a slightly damp cloth to clean the surface of the scale, followed
by a soft, dry cloth to wipe away any remaining moisture.
•
use chemical or abrasive cleaning agents to clean the scale.
Do not
2.2].
18
" when
Figure 2.2