Router Safety Warnings; Standard Accessories; Optional Accesories - HIKOKI M 12V2 Instrucciones De Manejo

English
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out
of reach of children and infi rm persons.
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input*
Collet Chuck Capacity
No-load speed
Main Body Stroke
Weight (without cord and

standard accessories)

*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Straight Guide ...........................................................1
(2) Bar Holder .................................................................1
Guide Bar ..................................................................2
Feed Screw ...............................................................1
Wing Bolt ...................................................................1
(3) Dust Guide.................................................................1
(4) Dust Guide Adapter ..................................................1
(5) Template Guide .........................................................1
(6) Template Guide Adapter ...........................................1
(7) Centering Gauge .......................................................1
(8) Knob ...........................................................................1
(9) Wrench .......................................................................1
(10) 8mm or 1/4" Collet Chuck.........................................1
(11) Wing Bolt (A) ............................................................4
(12) Lock Spring ..............................................................2
Standard accessories are subject to change without
notice.
OPTIONAL ACCESORIES - sold separately
(1) Template Guide
8
8000 – 22000 /min
Bottom of Sub base

ROUTER SAFETY WARNINGS

1. Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
p a r t s of t h e p owe r to o l " l i ve" a n d s h o c k t h e
operator.
2. Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped fi rmly during
operation.
4. The bit is very hot immediately after operation.
Avoid bare hand c ont ac t with the bit for any
reason.
M12V2
(110 V, 120 V, 220 V, 230 V, 240 V)
2000 W
12 mm or 1/2"
65 mm
6.3 kg
A
16.5 mm
18.5 mm
25.5 mm
28.5 mm
(2) Chuck Sleeve
M12SA2
1700 W
22000 /min
6.2 kg
B
18 mm
20 mm
27 mm
30 mm
20 mm
C
4.5 mm