Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Name of key Operations
NET
A
STABILIZED
B
STEP ON
C
HEIGHT
D
BMI
E
LO
BMI MODE
F
G
BATTERY
HEIGHT
ON
BMI MODE
OFF
TARE
kg/lb
ZERO
SET
When using the stand
Please pull out the stand at the back of the
display box.
When putting away the display box, please
insert the stand in the slot on the back of the
display box.
1-1)
<Before using>
1. Power source
Please use an AC adaptor or 6
1) In case of using batteries (not included)
Loosen the battery box fixing screw on the side of the display box and pull out the battery
box. Place the batteries in the direction as illustrated and insert the battery box back to its
original position and tighten the battery box fixing screw. When the
s is turned on in the battery replacement warning mark s LO BATTERY, replace all 6
batteries.
Be careful when replacing the batteries not to let the batteries fall off.
1-2)
2) In case of using AC adaptor (optional part)
Insert the AC adaptor jack into the DC jack on the side of the display box and plug the AC
adaptor into the AC wall outlet. (Use our genuine optional AC adaptor.)
<Check again if trouble is suspected>
(1) Nothing is displayed when
switch is pressed
If AC adaptor is used :
Check the connection of the AC adaptor jack to the DC jack, and the connection of the AC adaptor plug to the wall outlet.
If batteries are used :
The batteries may be weak. Try an AC adaptor or new LR6 (AA) batteries.
(2) Measurement is not accurate
Check that all legs of the scale are steady.
Accurate measurement may be impossible if the product is used where there is excessive vibration. Try using the product in a different place.
4
<Function of switches>
ON/ZERO key
NET mark
OFF key
STABILIZED mark
TARE key
STEP ON mark
BMI key
HEIGHT mark
UP key
BMI mark
DOWN key
BMI MODE mark
kg/lb key
LO BATTERY mark
6. Set up
When installing the display box on the wall
Please screw the wall-hanging screws into the
wall (leave the screws protruding from the
wall by about 5 mm).
Please insert the screw heads in the holes on
the back of the display box.
Please pull down the display box lightly with
your hands.
If the unit is not installed properly,
there is a risk that the display box will
fall down.
Please avoid installing the display
box in a place where the cable will
end up being trodden on or caught on
something.
Please do not swing the display box
5mm(0.2in)
around while holding the cable.
LR6 (AA Alkaline batteries).
1. Standard Weighing Procedures
ON
ZERO
d
NET
STABILIZED
STEP ON
HEIGHT
BMI
BMI MODE
d
NET
STABILIZED
STEP ON
d
NET
STABILIZED
STEP ON
d
OFF
2.Tare Weighing
ON
ZERO
d
NET
STABILIZED
STEP ON
HEIGHT
BMI
BMI MODE
d
NET
STABILIZED
STEP ON
d
NET
STABILIZED
STEP ON
d
NET
STABILIZED
STEP ON
is displayed and
3.Cancellation of Tare Weighing Function
NET
STABILIZED
STEP ON
d
NET
STABILIZED
STEP ON
7. Operation
ON
1. Turn on the power by pressing the
key.
ZERO
kg
lb
2. After all the segments flash, [0.0 kg] is displayed.
cm
ft.in
LO
BATTERY
kg
3. The person to be weighed should stand still in the middle of the scale.
The weight will be displayed.
kg
4. Measurement is completed.
When the person steps off the scale, the display will return to [0.0 kg].
Turn off the power by pressing the
OFF
key.
ON
1. Turn on the power by pressing the
key.
ZERO
kg
lb
2. After all the segments flash, [0.0 kg] is displayed.
cm
ft.in
LO
BATTERY
kg
3. Carefully place the tare items (clothes, etc.) at the center of the platform.
The weight of the items will be displayed.
4. Press the
key.
kg
TARE
An arrow will appear next to the t[NET] mark and [0.0 kg] will be displayed.
kg
5. When weighing an object including tare items, the weight of the object minus that of the tare
items, which is the net weight, will be displayed.
©
To change the tare weight, cancel the tare weighing function and repeat from step 3.
©
When using the tare weighing function, the measurement range is reduced by the tare weight.
(Measurement Range) = (Maximum Measurable Weight) - (Tare Weight)
1. Remove the tare items (clothes, etc.) from the tray.
kg
The weight will be displayed as a negative value.
2. Press the
key.
kg
TARE
The arrow next to the t[NET] will disappear and [0.0 kg] will be displayed.
5
Publicidad
Tabla de contenido
