Connecting The Camera To Your Pc - Easypix MovieCam SD III Manual De Instrucciones

Connecting the camera to your PC

1.
Turn on your computer, and then connect the USB
cable to the USB port of your computer.
2.
Connect the other end of the USB cable to your
camera.
If the camera's USB mode is set to MENU (please refer to
the Advanced settings in Chapter 8), a menu will pop up
when the camera is connected to your computer. You can
then select CAMERA (for PC camera)
or DISK (for removable disk)
according to your purpose.
Notice for Windows 2000/XP/ME users:
If you select DISK mode and then want to disconnect the
camera from your computer, please follow these steps:
1. Double-click
2. Click (USB Disk), and then click Stop.
3. Select the camera when the confirmation screen appears
and click OK.
4. Follow the on-screen instructions to safely disconnect the
camera from your computer.
~ 37 ~
USB Mode
CAMERA
DISK
on the system tray.