Device Table - Universal Electronics ATLAS OCAP 5 Guia Del Usuario

Key
Press SHIFT to access additional cable
features (see your cable converter's
manual).
Use PIP ON-OFF to switch the Picture-
In-Picture feature on or off (if available
on your TV or cable service).
Use PIP SWAP to switch images and
sound between the main and window
pictures (if available on your TV or
cable service).
Use PIP MOVE to move the window picture
to different positions in the main picture
(if available on your TV or cable
service).
Use PIP CH+ (or CH-) to select the next
higher (or lower) PIP channel (if
available on your TV or cable service).
In the CBL mode, use VIDEO SOURCE to
view other video sources (A or B)
instead of cable.
In all TV mode, use VIDEO SOURCE to
watch TV or video/DVD programs on a
desired device.
For amplifiers/receivers, use VIDEO
SOURCE to select an input source.

Device Table

NOTE: Please refer to the table below when
performing the instructions in
"Programming Device Control" on page 10 or
"Setting Up a Combo Unit" on page 11.
After programming, the Atlas OCAP 5-Device Remote
Control will be able to control the following types of
devices:
Device Key Controls these types of devices
VCR, TV/VCR Combo, PVR (Personal
Video Recorder), or extra DVD Player
DVD Player, or extra VCR, TV/VCR
Combo or PVR
Audio Amplifier, Tuner, or Receiver
Television
www.urcsupport.com/atlasocap
Function
8