dirna Bergstrom Bycool compact 1.4 IVECO Instrucciones De Montaje página 22

COMPACT 1.4
EN
To place the front (at the previous mentioned)
12
spigots with (1) washer M6 wide wing and
(1) nut M6 in each spigot. To tight nuts til the
rubber ducting til run into the upper rubber of
the unit.
IVECO Stralis since 2008: Secure the
front with L25 hexagonal separators. (*)
This model does not use these nuts and
washers.
Important: The rubber ducting must being
run into the upper rubber of the unit to
avoid air leaks.
12
EPDM
Gasket
Cabin roof
Upholstey
Tighten nut mentioned under point 10 until it
13
touches upper surface of front.
13
EPDM
Gasket
Cabin roof
Upholstey
Unit base
*
Nut M6
Stud M6
Unit base
Nut M6 (point 10)
Nut M6
Stud M6
Rubber ductings
Rubber ductings
22
Air conditioning for vehicles
Foam Gasket
front with louvers
Foam Gasket
front with louvers