Technical Data; Functional Description; Electrical Connection And Operation; Electronic Control - Festool HL 850 E Manual De Instrucciones

6

Technical data

Wattage:
No load speed:
Plane width
Chip thickness
Rebate depth
Weight
Safety standard:
Symbols
V volts
A amperes
Hz hertz
W watt
alternating current
n no load speed
0
Class II Construction
rpm revolutions per minute

Functional description

1.1 Lock off button
1.2 On/Off switch
1.3 Shavings ejector
1.4 Shift lever for shavings ejector
1.5 Spindle stop
1.6 Interlock for cutting depth adjustment
1.7 Supplementary handle / cutting depth adjustment
1.8 Parking device
Use for intended purpose
The HL 850 E planer together with the available Festool
accessories is designed for processing wood, soft plastics and
similar materials.
The user shall be liable for damages and accidents due to
incorrect use.

Electrical connection and operation

The supply voltage must comply with the voltage given on
the ratings plate.
The switch (1.2) is used as an on/off switch. For your safety
this is equipped with a switch-on interlock (1.1 ). In order to
run the planer the switch-on interlock must first be pressed
and then the switch.
Extension cable
If an extension cable is required, it must have a sufficient
cross-section so as to prevent an excessive drop in voltage
or overheating. An excessive drop in voltage reduces the
output and can lead to failure of the motor. The table shows
the correct size to use, depending on cord length and tool's
ampere rating. Use only U.L. and CSA listed extension cables.
Never use two extension cables together. Instead, use one
long one.
Note: The lower the A.W.G. number, the stronger the cable.

Electronic control

The devices are fitted with a full-wave electronic control with
the following functions:
• Smooth start-up
The electronically-controlled smooth start-up ensures that the
machine starts without jolts.
HL 850 E
850 W
10 000 rpm
82 mm (3.2 in.)
0 - 3.5 mm (0 - 0.14 in.)
unlimited
3.9 kg (8.6 lbs)
/ II acc. to
UL 745, CSA C22.2 No. 745