Grant 2010 Serie Manual De Usuario página 14

6.3.6 Interval Setup
A setup created from the control panel will
assign all channels to the same logging
interval. To change or view this interval choose
„Intervals‟ from the main „Setup‟ menu.
6.3.6 Sensor Power Setup
The sensor power setup can be changed by
going to „Sensor Power‟ from within the main
„Setup‟ menu.
Important Notes on Setup using the Control Panel
Full setup capabilities of the SQ2010 are provide using the SquirrelView software pro-
vide. When using the control panel a few important points should noted:-

Whilst all channels are assigned to the same interval, Interval A, all intervals can be
viewed in the case of a more complex setup from SquirrelView

To avoid problems with wiring configuration, sensor types are not editable once set but
their range and sensor power requirements can be. Delete a channel if you require to
change its Sensor Type

Calculated channels setup from SquirrelView will no be shown on the view channels
option

The reference junction can not be deleted while a sensor type that requires it for
correct operation is set up, e.g. A thermocouple.

You cannot change a setup whilst the logger is armed
Version 3.0 - April 2009
Page 13
www.grant.co.uk
28507