Publicidad
Idiomas disponibles
Idiomas disponibles
menu item
Description
MASCHINE
After the converter has been booted successfully it will show all compatible machines.
respectively
Once a machine has been connected the screen will automatically switch to the
HOME
illustration of the machine. The code „1~" respectively „1P" or „3~" respectively „3P"
indicates whether the converter has recognized single phase or three phase operation.
W hen starting the machine the screen will automatically switch to displaying the load
conditions (working load of the machine). W hen disconnecting the machine the screen
will automatically show all compatible machines again. By pressing
manually toggle between „HOME" and „MASCHINE" .
UPDATE
After initiating the update process by pressing
opened within which the user can connect to the converter utilizing the „W EKA Service
App" (see additional information below) and if necessary apply a firmware update. The
user will be guided through the process with information on the display of the converter
as well as on the app. This part of the process can be aborted without risk at any time
by pressing
the beginning once the user has initiated it again. In case the update process fails
please contact W EKA, we can help you to restore the converters firmware.
LANGUAGE
All of the listed languages can be set as the default language of the converter. The list
of available languages will be extended from time to time and can be updated using the
update feature. By pressing
it will be stored as default language.
BRIGHTNESS
By changing the backlight brightness the readability of the display can be adopted to
many situations. Even in case of direct sunlight the display will remain its high contrast
due to its ability to use the sun as light source. By pressing
be changed and by long pressing
CURRENT
In single phase operation mode the maximum input current can be reduced to 15A or
even 10A. By doing so it is possible to operate a machine even if the mains supply is
weak or an inadequate generator is used. By pressing
changed and by long pressing
reduced input current it will be indicated by the symbol
display.
TIME
The integrated real time clock provides the possibility to keep track of the daily usage
of the converter. The format of time and date can be adjusted according the
specification of the country. By pressing
by pressing
changed it will be stored by long pressing
DEBUG
The readout of real time data (for example motor frequency, mains frequency,
intermediate voltage, motor current, ...) provides additional information for
troubleshooting in case of error or malfunction. This menu item is mainly dedicated to
a service technician.
DEVICE INFO
An overview of device specific settings and version numbers helps to identify internal
components and the overall condition of the converter. This is especially helpful for the
service technician to evaluate if an update may be necessary.
ARCHIVE
Once an error message shows up simultaneously a copy of this error including the time
stamp will be stored. By doing so it is possible to insight the history of the converter at
a later time. By long pressing
, already downloaded data will be refused and the process will start from
a language can be selected and by long pressing
it will be saved. Once the converter is set to a
and
they can be changed. Once the format of time or date has been
the content of the error storage will be cleared.
24
an adequate time frame will be
it will be stored.
the current setting can be
or
the individual values can be selected and
.
the user can
the brightness level can
in the header of the
Publicidad
