Operating Instructions - Corby 3300 Manual Del Usuario

OPERATING INSTRUCTIONS

CONSIDERATIONS BEFORE USE
Using your Corby press daily will add to the life and appearance of your trousers.
Your Corby is safe to use on any material which you would normally iron, however,
you should check for any special instructions before pressing. One of the benefits of
your Corby is that it will not impart a surface shine on the material, something which
can occur after repeated ironing. The inherent humidity content of natural and mixed
fibres assists the pressing process, however, some man-made fibres, such as polyester,
resist humidity and may therefore require extra pressing.
On no account should any trousers be dampened before pressing.
Please press one pair of trousers at a time, ensuring that all pockets are emptied of
keys, coins or other sharp objects as they could damage the heating pad.
INSERTING TROUSERS
• Raise the lever arms and the press to reveal the heating pad.
• The pad is cushioned to accept different fabric thickness and raised seams.
• Insert trousers "feet" first into the base of the press.
• Smooth trousers into position, ensuring existing creases are in line.
• Firmly grip top of trousers, gently pulling while closing the press.
• Push down on one of the lever arms to lock into position
CORBY 3300
• Press the ON/(cancel) button to run a 30 minute cycle (LED on).
• Press the ON/(cancel) button again to cancel the cycle at any point (LED off).
CORBY 4400
• Select required time by pushing 15 or 30 minute buttons (LED on).
• Press the ON/(cancel) button to run cycle (LED on).
• Press the ON/(cancel) button again to cancel the cycle at any point (LED off).
(When canceled the ON/cancel LED will go out but the time selection will remain on
for 5 minutes allowing opportunity to restart the cycle)
CORBY 7700/EXECUTIVE/EXECUTIVE +
• Select required time by pushing 15, 30 or 45 minute buttons (LED on).
• Press the ON/(cancel) button to run cycle (LED on).
• Press the ON/(cancel) button again to cancel the cycle at any point (LED off).
1 4