Makita DUR189 Manual De Instrucciones página 7

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
No load speed
(without cutting tool)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Noise
Applicable standard : EN50636
Model
DUR189
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Model
DUR189
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
Nylon cutting head
(P/N 198971-4 / 198972-2)
Plastic blade
(P/N 198383-1 / 198384-9)
Type
Nylon cutting head
Plastic blade
Type
Nylon cutting head
Plastic blade
4,000/5,000/6,000 min
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Sound pressure level average
L (dB(A))
PA
78
78
Left hand
2
a (m/s ) Uncertainty K
h,W
(m/s
0.4
2.5
0.6
2.5
7 ENGLISH
DUR189
-1
1,510 - 1,610 mm
2.0 - 2.4 mm
300 mm
255 mm
D.C. 18 V
3.0 - 3.3 kg
Uncertainty K (dB(A))
2.0
3.7
Right hand
2
a (m/s )
h,W
2
)
2.5
2.5
Uncertainty K
2
(m/s )
0.1
0.3