Use Instruction; Technical Data; Disposal Of Old Electrical Appliances - Beper 70.098 Manual De Instrucciones

Floor lamp Use instructions

USE INSTRUCTION

Place the floor lamp on a plane and stable surface.
Screw the bulb (not included), and connect the cord only after done it.
Lightly press with foot on the button to turn on the floor lamp.
Do not use bulb with power over 25W.
The floor lamp Tondy allow to direct the light where it is necessary thanks to the directional
head lamp.
Wait approx. 10 minutes before changing the bulb, the used bulb must cool down before.
Unscrew the used bulb and change with a new one, same type (E14 bulb, Max 25W).
For cleaning use a wet cloth, do not put water or liquids onto the floor lamp.

TECHNICAL DATA

Voltage : AC220­240V
Frequency: 50Hz
Power: 25W
Bulb: bulb holder E14
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re­
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco­
very and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol
that when you dispose of the appliance, it must be separately collected.
on the product reminds you of your obligation,
10