Product Mounting Diagram; Mounting · Guidelines - Chauvet Professional Epix Drive 900 Guía De Referencia Rápida

ÉPIX Drive 900 QRG
Mounting
Product
Mounting
Diagram
Mounting
Guidelines
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our CHAUVET Professional line of mounting clamps,
go to http://trusst.com/products/. The rack mount ears are not shipped connected to
the product.
M12 Mounting
Point
Chauvet recommends using the following guidelines when mounting this product:
·
Mount this product away from any flammable material as indicated in the
Safety Notes section.
·
Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
·
Before deciding on a location, always make sure there is easy access to the
product for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the
product can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
·
When mounting the product on the floor, make sure that the product and
cables are away from people and vehicles.
Safety Notes. Use at least one mounting
4 rubber feet for setting on a
flat surface.
6
Safety Cable
2 removable rack ears on
each side of the product.
Technical Specifications).
EN