Turning Button Vibrations On/Off; Cleaning And Maintenance; Disinfecting The Whirltub System; How Often - DURAVIT Combi-System L Manual De Instrucciones

> Activate the Bluetooth mode on your audio source as described in its operating
instructions.
> Search for the "Duravit" Bluetooth device and establish a connection to it.
> Enter the activation code: "2412".
> Select music and adjust the volume on your audio source.

6.10 Turning button vibrations on/off

Prerequisite: Display turned off.
> Press the " " for 10 seconds.
The " " button illuminates.
> Press the " " button again.
"On/Off" button illuminates.
> Press the "On/Off" button.
> Press the " " for 2 seconds.
Button vibrations are turned on/off.

7. cleaning and Maintenance

NoTIcE
The surfaces may be damaged by using the wrong cleaning agents.
• Only use a cleaning agent that is recommended by Duravit.
• Never use abrasive, aggressive or chemical cleaners.
7.1

Disinfecting the whirltub system

How often?

Disinfect the whirltub system before using it for the first time, and then after every
tenth bath, but at least once a month and after a long period of no use.

How?

cAUTIoN
chlorine bleach irritates the skin.
> Observe the safety instructions on the disinfectant.
> Do NOT bathe in the whirltub while disinfecting it.
34