Filter Installation; Mounting Diagram - Chauvet Professional Epix Strip Tour 50 Guía De Referencia Rápida

Filter Installation

The ÉPIX Strip Tour 50 includes a black stealth filter already installed. Follow the procedure below to install the included
Black Stealth Filter or Round Milky Filter.
1. Locate the end cap of the product that does not have the interlocking hardware.
2. Push in on the end-cap latch.
3. Slide the installed filter out and replace it with the desired filter.
4. Release the end-cap latch.
End-Cap Latch
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our CHAUVET Professional line of mounting
clamps, go to http://trusst.com/products.

Mounting Diagram

Mounting Clamp
ÉPIX Strip Tour 50 QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product. Make sure the
Safety Cable
Safety Loop
Eye Bolts
EN
4