Safety Compliance - SMC Networks TigerStack Serie Guia Del Usuario

N
ORMATIVAS
Advertencia: No enchufe conectores telefónicos en los puertos RJ-45. Podrían dañar el
dispositivo.
Australia AS/NZS 3548 (1995) - Clase A
N11846
El contacto de SMC para estos productos en Australia es:
SMC Communications Pty. Ltd.
Suite 18, 12 Tryon Road,
Lindfield NSW2070,
Teléfono: 61-2-94160437
Fax: 61-2-94160474

Safety Compliance

Warning: Fiber Optic Port Safety
CLASS I
LASER DEVICE
Advertencia: Seguridad del puerto de fibra óptica
DISPOSITIVO
LÁSER DE CLASE 1
Power Cord Safety
Please read the following safety information carefully before installing the switch:
WARNING: Installation and removal of the unit must be carried out by qualified personnel only.
• The unit must be connected to an earthed (grounded) outlet to comply with international
safety standards.
• Do not connect the unit to an A.C. outlet (power supply) without an earth (ground)
connection.
• The appliance coupler (the connector to the unit and not the wall plug) must have a
configuration for mating with an EN 60320/IEC 320 appliance inlet.
vii
When using a fiber optic port, never look at the transmit laser while
it is powered on. Also, never look directly at the fiber TX port and
fiber cable ends when they are powered on.
Al usar un puerto de fibra óptica, nunca mire al láser de transmisión
si está encendido. Tampoco debe mirarse directamente al puerto de
fibra TX ni a los extremos de los cables de fibra óptica cuando estén
encendidos.