Descargar Imprimir esta página

Polk Audio SurroundBAR 400 Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

SPEAKER AND SUBWOOFER HOOKUPS FOR CHT SURROUNDBARS
SUBWOOFER
SUBWOOFER HOOKUP
To hook up a subwoofer, use a single RCA cable and
make the connection from the SUB OUT connection
on your receiver to the LFE input on your subwoofer.
(See wire hookup diagram above.) If no LFE input
is available, use LINE R or L and turn "Low Pass"
fully clockwise.
Recommended Polk Audio Subwoofers:
DSW
440wi, DSW
550wi & DSW
PRO
PRO
OPTIONAL SATELLITE LOUDSPEAKER HOOKUP
Dedicated satellite/surround loudspeakers may be employed
to create an even more enveloping surround experience.
SURROUNDBAR 400 CHT:
Do not connect the provided loudspeaker cable's Surround and
Surround Back conductors to your receiver. Instead, connect your
dedicated surround speakers to these amplifier outputs. Be sure
to "tie off" the unused Surround and Surround Back wires.
For LCR Mode: Connect the Surround Left (SL), Surround
Right (SR), Surround Back Left (SBL) and Surround Back
Right (SBR) channels from the outputs of your receiver to
the corresponding inputs on the four satellite loudspeakers.
PSW111,
660wi.
PRO
Customer Service Hours of Operation: Monday-Friday, 9
HOME THEATER
RECEIVER/PROCESSOR
For 5CH Mode:
Connect the Surround Back Left (SBL) and Surround Back
Right (SBR) channels from the outputs of your receiver to
the corresponding inputs on the two satellite loudspeakers.
For 7CH Mode: Do not connect any satellite loudspeakers
to your receiver. The SurroundBar reproduces all 7 channels.
Note: Be sure to "tie off" the unused channels
on the provided cable.
F/X
®
WIRELESS SURROUND
Polk Audio offers a unique, wireless single-enclosure surround
sound loudspeaker. The F/X Wireless Surround sits behind
your listening area on the floor, a table or shelf. A 2.4 GHz
transmitter connects to your receiver and communicates
with the F/X loudspeaker, which will reproduce both
Surround and Surround Back channels when properly
configured and the SurroundBar CHT set in LCR mode.
For more, go to www.polkaudio.com/homeaudio/fx/.
-5:30
polkcs@polkaudio.com
M
PM EST
11

Publicidad

loading

Este manual también es adecuado para:

Surroundbar 500