Publicidad
Important Safety Instructions
1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do not understand
these instructions, need clarification or further explanation, please call our toll
free answer line for assistance at 1-800-867-6763.
2. Do not load the cart with more than 600lb (272kg). Do not use the dumping
feature of the cart with more than 300lb (136kg). The weight rating is based on an
evenly distributed load.
3. Do not allow children to use the cart without supervision. This cart is not a toy.
4. Do not use this cart for transporting passengers.
5. This cart is not intended for highway use.
6. Do not exceed 5 mph.
7. Do not load any items on the top edges of the tray.
8. If any parts become damaged, broken or misplaced, do not use this cart until
replacement parts have been obtained.
9. Do not use this cart on surfaces or for transporting objects than can cause
damage to the pneumatic tires or tubes.
Do not inflate the tires to more than 30 PSI (2.07 BAR).
10. It is recommended that the cart be inspected for damage before each use.
11. KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE.
Assembly Instructions
Your cart requires assembly. Account for all parts and hardware before beginning
assembly. If any parts are missing, damaged or if you have any questions or need
additional instructions DO NOT RETURN THIS PRODUCT TO THE RETAILER, visit us at
w w w w w w . . t t r r i i c c a a m m . . c c o o m m to complete the replacement parts submission form or call our
customer service department at 1-800-867-6763.
Tools required for assembly: standard screwdriver,
phillips screwdriver, pliers and socket set
(or two adjustable wrenches).
Note: During assembly of each step of
assembly, assemble all hardware and hand
tighten. Once all hardware is installed for this
particular step, tighten all hardware.
Step 1
Locate the rear axle assembly (the left and
right rear struts are pre-assembled to the rear
axle frame as shown below).
Step 2
Attach the rear axle assembly and the rear
axle support bar to the tray using M8x45
internal button head bolts (2), M8 lock nuts
(2), and M8 washers (4).
Attach the left and right rear struts to the
tray using M8x20 internal button head bolts
(4), M8 lock nuts (4) and M8 washers (8).
C, D, H
F , G
Publicidad
