i-tec iKeypad Manual De Instrucciones página 9

13 | 03 | 2020
iKeypad®
operations instruction
* iKeypad is a lock that does not work in standalone mode.
* Follow the link/QR code to download the version of iTEC on Access you want to use with iKeypad.
https://itec.com.pt/product.php?id=103
iTEC on Access®
1 - Drill a hole for the cable
Drill a hole at appropriate position to make space for the cable to connect to the power source.
2 - Install the mounting plate
Fix the mounting plate with 4 screws.
3 - Install the hook
Fix the hook to the mounting plate with 2 screws.
4 - Install the access controller
Fit the access controller into the hook and fix it on the mounting plate with a screw in the bottom.
LIMITED WARRANTY:
For any defect in material and workmanship, the original purchaser of the product:
1)Can return or ask for a replacement within 7 invoice days.
2)Can ask for a replacement within 15 invoice days.
3)Can ask for free repair in 365 invoice days.
This warranty does not cover defects caused by modification, alteration, misuse or physical abuse of
the product.
www.itec.com.pt
9