Functional Overview; Technical Data - Normfest ML 220 Instrucciones De Uso

NORMFEST ML 220
GB Operation Manual
SAFETY INSTRUCTIONS
• Read the operating instructions carefully
before using and observe the safety inst-
ructions!
• Do not use the device if there is damage to
the housing, plug or cable. Consult your local
authorised specialist!
• The device must only be operated in closed,
dry rooms!
• Carry out cleaning tasks only when the mains
plug is removed from the mains power!
• Do not open the device! Repair work and
replacing the rechargeable battery pack may
only be carried out by electricians.
• Keep away from children! Children should be
supervised in order to ensure that they do not
play with the device!
• This device is not to be used by persons
(including children) who have restricted
physical, sensory or mental capabilities or
who do not have adequate experience and
knowledge in handling this device. Such
persons must be instructed beforehand by
a supervisory person who is responsible for
their safety or must be supervised during the
use of the device!
• Failure to observe the safety instructions can
result in dangerous injuries to persons or
damage to the device!
SCOPE OF DELIVERY
• WL200R Workshop lamp
• USB power supply 5V/500mA
• USB/Micro-USB charging cable 150cm
• Manual

FUNCTIONAL OVERVIEW

• Professional workshop lamp with the latest
SMD LED technology
• Robust plastic housing with rubber-coated
grip
• Can be swivelled through 340°, lamp grip
can be locked in twelve positions for flexible
direction of the light
• Fastening magnet on the bottom of the grip
• Fold-out hook on the top of the housing can
be swivelled through 360°
• Integrated belt clip on the rear of the housing
• Light with two light functions (100% / 50%
light power)
• Permanently installed Li-ion rechargeable
battery pack (3.7V / 1550mAh)
• Charging possibility via USB mains adapter
(110V-240V) or USB car adapter (12-24V)
• Charge monitoring via coloured LED on the
rear side of the lamp

TECHNICAL DATA

Integrated
illuminants: main light 5x SMD LEDs,
Nominal power 3.25W
Lighting intensity: 400 Lux at 0,5m distance
Luminous flux:
220 Lumen
Battery life: ca. 3.5h (100% light power)
ca. 10h (50% light power)
Input voltage for
the external mains
adapter: 100-240V AC / 50-60Hz
Charge time: ca. 4,5h
USE
The on/off switch for the workshop light can be
found on the top of the housing:
Press 1x: The WL200R workshop lamp will be
switched on in 100% light mode.
Press 2x: The workshop lamp illuminates at the
50% setting.
Press 3x: The lamp is switched off.
CHARGING PROCEDURE
Charge the workshop lamp fully before using
for the first time. If the workshop lamp has been
stored for an extended period of time it should
likewise be fully charged again before first use.
The following charging options are available:
• Via USB mains adapter plugged into the
mains outlet
• Via USB car adapter connected to the ciga-
rette lighter of the vehicle
• Via USB cable connected to a third party de-
vice with a USB output port (e.g. PC, laptop)
To charge the WL200R workshop light, pull the
sealing cap off the micro-USB socket on the rear
of the lamp. Connect the USB mains adapter /
USB vehicle adapter with the WL200R workshop
lamp by plugging the micro-USB plug on one end
of the USB / micro-USB charge cable provided
into the micro-USB socket on the light and plug-
ging the USB plug on the other end of the charge
cable into the USB socket of the USB mains
adapter / USB vehicle adapter. Then plug the USB
mains adapter into a mains outlet or plug the