Magic Leap 1003 Guía De Seguridad E Información Sobre Normativas página 4

Changes
Magic Leap may change or modify this Safety Guide from time
to time to keep it accurate and complete. If we issue a new Safety
Guide, please discard your old copy of it and only use the new one.
We encourage you to review our Safety Guide at www.magicleap.com/safety
from time to time to ensure you are reading the latest version.
Setting Up the Device Before Use
Instructions. Before using Magic Leap 1, you should read and follow
all setup and operating instructions provided with the device and on
the device. For example, before using Magic Leap 1 for the first time,
be sure to go through the Fitting Guide and Visual Calibration, both
of which you can access in Settings > Device > Calibration, where you
can click "Run Fitting Guide" and "Run Visual Calibration."
Fit. Before using your Lightwear, you should make sure it is level, it
rests comfortably around your head, there is a gap between your
ears and the Lightwear, and there is no pain or pressure on your head.
For more guidance, please use the Fitting Guide (in your Settings
menu on the device). Also make sure you can see clearly through
the Lightwear and that the nose pad rests comfortably on your nose
bridge. If the nose pad does not lift your Lightwear up such that you
can see clearly through your Lightwear, replace your nose pad with
another size and go through the Fitting Guide again.