Motorola Multi-Unit Guia Del Usuario página 8

68012007024_Multi-Unit Charger.book Page 6 Monday, August 11, 2014 4:39 PM
TROUBLESHOOTING
When troubleshooting, always observe the charging indicators in Table 3:
Charger Indicator
No indication
Single green blink
Blinking red
Steady red
Blinking Orange
Blinking green
Steady green
Figure 2: Battery Locating Rail Removed
Table 3: Battery Charging Indicators
Battery is inserted incorrectly.
Successful charger power-up.
Battery is unchargeable or not making proper contact.
Battery is in rapid-charge mode.
Battery is recognized by charger but is waiting to charge.
(Either the battery voltage is too low or the battery temperature
is too low or too high to allow charging. When this condition is
corrected, the battery will automatically begin charging).
Battery is charged (to 90% or greater capacity).
Battery is fully charged.
6
Description