... Step 5 - end
ok
stop/esc
confirm
1 time
Important – From this moment on, the chosen setting for this special function will
remain the same until the automation systems in question receive a different setting
due to an event occurring or if the user goes through this procedure again.
example:
(permanently ON)
(display)
10 - BATTERY REPLACEMENT
When "
" displays, it is time to change the batteries as soon as possible. In this
situation, there is a risk that the commands may not be sent properly to the automa-
tions. Replace the batteries as shown in the figure below.
Caution! – Once you have replaced the batteries, you must make the basic
settings again with Procedure 1.
• Disposing of batteries
Caution! – Discharged batteries contain pollutant substances and therefore must
never be disposed of as normal waste. Dispose of observing waste separation and
collection procedures as required by local regulations.
English – 20