Orbegozo SET 5000 Manual De Instrucciones página 10

SET 5000
33. For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30mA is advisable in the
electrical circuit supplying the bathroom. Ask your
installer for advice.
34. WARNING: Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
USAGE
IMPORTANT: THIS PRODUCT REACHES HIGH TEMPERATURES
·Plug into a suitable mains supply when the straightener is ready for use
·Wait for 1-2 minutes to allow the appliance to reach its working temperature. Always place straightener on
a solid, flat, heat resistant surface. Do not place straightener on any soft or uneven surfaces such as carpets,
bedding or rugs and never cover. The plates reach a high temperature quickly.
·Add heat protection spray throughout hair for protection, shine and a long lasting style.
·Switch the straightener on using the ON/OFF function.
·Separate a section of hair approximately 5cm in width and smooth it out with a brush.
·Place the chosen section of hair between the plates of the straightener and close the plates. Take care not
to touch the very hot plates.
·Hold the straightener in place until the hair is fully heated this will be almost instant. When holding the
straightener always ensure fingertips are placed away from the hot plates.
·Once the hair is heated, holding the hair taut, carefully slide the plates along the selected section of hair, in
one smooth movement all the way down to the ends.
·Keep the strands of hair smooth whilst you work to avoid ridges.
TO CLEAN
Unplug the appliance and allow it to cool down. Use a soft slightly damp cloth to wipe appliance surfaces.
Do not allow water or any other liquid to get into the unit.
TO STORE
Unplug the appliance, allow it to cool, add store in its box or in a dry place. Never store it while it is hot or
still plugged in. Never wrap the cord tightly around the appliance. Never hang unit by the cord .Store the
cord loosely coiled do not put any stress on the cord where it enters the unit, as it could cause the cord to
fray and break.
When not in use "unplug it."
Allow the appliance to cool and store it in a dry location. This hair dryer features a loop allowing it to be
conveniently hung on a hook for easy access. Never wrap the cord around the appliance since this will cause
the cord to wear prematurely and break. If the supply cord of this appliance becomes damaged the appliance
must be replaced by its manufacturer, its Service Agent or a similarly qualified person in order to avoid a
hazard.
10