Electric Connection - Nice XBA7 Instrucciones Y Advertencias Para El Instalador

5 – ELECTRIC CONNECTION
IMPORTANT! – All electrical connections must be made with the unit discon-
nected from the mains power supply.
After the installation (paragraph 4), connect the electric cable:
01. Connect the connector present on the control unit: see fig. 10 for SBAR and fig. 11
for MBAR/LBAR;
02. Finally, connect the ground electrical wire (fig. 12).
The desired operating mode can now be programmed in the control unit; refer to the
Oview function datasheets on the website www.nice-service.com, in the "download"
section.
English - 5