Electrical Requirement (For Uk Market Only) - Panasonic NC-DK1 Instrucciones De Funcionamiento

Electrical Requirement
(For UK market only)
FOR YOUR SAFETY PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience. A 13-
amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 13-amp
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on
the body of the fuse.
If the plug contains a removable fuse cover, you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover, the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the
socket outlet in your home, then the fuse should
be removed and the plug cut off and disposed
of safely. There is a danger of severe electrical
shock if the cut off plug is inserted into any 13-amp
socket.
16
NC-DK1(PZ05E669).indb 16 2016/07/04 12:47:08