Explanation Of Symbols Used; Symbols In The Documentation; Symbols In The Illustrations; Product-Dependent Symbols - Hilti NPR 032 IE-A22 Manual De Instrucciones

• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2

Explanation of symbols used

1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
1.2.2

Symbols in the documentation

The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3

Symbols in the illustrations

The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols can be used on the product:
Risk of crushing injury!
Direct current (DC)
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
12 English 2188465
*2188465*