interior.qxd
5/1/05
4. OPERATING INSTRUCTIONS
•
Before using the fan, place it on a
stable, flat surface.
•
Press the "0" button to ensure the fan
is in stop position, and plug it in.
•
Press button 1, 2 or 3 to choose the fan
speed.
2A- Control panel
2A.1 - Press the transparent cover
down to access the control
panel.
2A.2 - Speeds
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
2A.3 - Timer
0 = Off
Turn the timer clockwise to
select functioning time.
Maximum time: 3 hours.
2A.4 - Oscillation
side
0 =
2A.5 - Ioniser (MOD. CA-50i)
press the switch. The pilot light
on the front of the appliance will
light up. To switch off the
ioniser, press the same switch
again. The pilot light will go out.
2B – Adjusting the air outlet direction
The direction of the air outlet can be
changed by moving the flaps inside the
appliance. These flaps are turned by
moving the levers on the air outlet
grille up or down.
13:52
Página 5
Continuous functioning
Fan moves from side to
Fan remains stationary.
To activate the ioniser,
5. CLEANING
Unplug the appliance before cleaning it.
Clean the appliance with a soft damp
cloth.
DO NOT SUBMERGE THE APPLIANCE
IN WATER. Do not use solvents or
abrasive products to clean the fan.
6. STORAGE
To store the appliance, first dismantle it
by following the assembly instructions in
reverse order. It must be stored in a dry
place.
6