Pin Assignment Chart - Sartorius YDO01MS-R Instrucciones De Instalación

Information for the User
1
6
10
Installation Instructions

Pin Assignment Chart

Female interface connector:
25-pin D-Submini (DB25S) with screwed fastening
Connector required (recommendation):
25-pin D-Submini (DB25S) with shielded cable clamp assembly
and shield plate (Amp type 826 985-1C) and fastening screws
(Amp type 164 868-1)
Pin assignment 25-pin socket, RS-232:
Pin 1: Signal ground
Pin 2: Data output (TxD)
Pin 3: Data input (RxD)
Pin 4: Signal GND
Pin 5: Clear to Send (CTS)
Pin 6: Not used
Pin 7: Internal ground (GND)
Pin 8: Internal ground (GND)
Pin 9: Not used
Pin 10: Not used
Pin 11: + 12 V output
Pin 12: Reset _ Out
Pin 13: + 5 V output
Pin 14: Internal ground (GND)
Pin 15: Control input/output 1, menu-configurable
Pin 16: Control input/output 2, menu-configurable
Pin 17: Control input/output 3, menu-configurable
Pin 18: Control input/output 4, menu-configurable
Pin 19: Control input/output 5, menu-configurable
Pin 20: Data Terminal Ready (DTR)
Pin 21: Not used
Pin 22: Not used
Pin 23: Not used
Pin 24: Not used
Pin 25: +5 V output
1
) = Restart peripherals
Pin Assignment Chart, 9-contact Female Connector, RS-232:
Pin 1: Not used
5
Pin 2: Data output (TxD)
9
Pin 3: Data input (RxD)
Pin 4: Not used
Pin 5: Internal ground (GND)
Pin 6: Not used
Pin 7: Clear to send (CTS)
Pin 8: Data Terminal Ready (DTR)
Pin 9: Not used
Establish a connection via a conventional RS-232 cable.
1
)