LIST OF COMPONENTS
fig. 1
A
Travel cot frame
B
Base mattress
C
Bassinet support
D
Tubes for the bassinet
E
Mosquito net
HOW TO SET UP THE TRAVEL COT
fig. 2
Open the bag and take all the parts out.
fig. 3
Unfasten the 3 velcro straps that are around the mattress.
fig. 4
Unfold the travel cot (A).
fig. 5
Grasp the travel cot at the shortsides and pull upwards until they are engaged.
Repeat the same process for the longest sides.
fig. 6
Make sure that all 4 sides of the travel cot are correctly engaged then push
down the base pressing the centre.
WARNING! Don't reverse the above steps. It won't be possible to engage the 4 rails
if the centre of the base is down.
fig. 7
Install the mattress on the base (B) and fasten it by passing the 4 straps (F) in the
holes and closing the velcro.
INSTRUCTIONS
EN
25