Inglesina zuma Manual De Instrucciones página 35

TRAY
fig. 25 The high chair is equipped with a tray (C): to mount the tray on the high chair, insert the two (R) ends
into the proper (S) housing points, until you hear a CLICK signaling its correct hooking.
CAUTION! Always verify that the tray is correctly hooked before use.
fig. 26 After having hooked the tray (C), it is possible to adjust its distance from the seat in order to be able
to seat the baby more easily. Act on the (T) lever positioned under the tray and extract it. Insert the baby and
then take the tray back to the closing position (1) just by pushing it towards the backrest.
CAUTION! The temporary position (2) of the tray is used only for easing the insertion of the
baby! Never use the tray in this position.
fig. 27 To extract completely the tray, push simultaneously outwards the (U) levers positioned on the sides
of the tray and extract it.
fig. 28 The tray is equipped with an easily removable tray (D) cover that can be washed even in the
dishwasher.
fig. 29 When the high chair is in closed position, the tray (C) can be conveniently stored as shown in figure.
LINING
fig. 30 The high chair has a textile lining composed of 2 separate pads: one for the seat (K) and one for the
backrest (L).
fig. 31 To attach the backrest pad (L) simply fasten the velcro pads (V) and thread the back safety belts
through the eyelets you wish to use.
fig. 32 To fasten the pad to the seat (K), thread the crotch strap through the required eyelet.
fig. 33 Then insert the pair of plastic hooks (X) into the corresponding holes on the seat and fasten the rear
button (Y).
REDUCING PAD
fig. 34 The high chair is equipped with a comfortable fabric reducing pad (M) that can be easily removed
and hand washed at 30°.
fig. 35 To attach the reducing pad (M), thread the back safety belts through the rear opening and the
crotch strap through the required eyelet.
fig. 36 Then insert the 2 plastic tabs (W) of the reducing pad under the seat pad.
fig. 37 Complete the dressing stage by inserting the back belts into the pair of eyelets you wish to use and
fastening the velcro (Z) to the backrest.
CAUTION! Always use the reducing pad with the safety belts.
EN
35