Instructions of use
Erecting
1.
Put the bed on its feet (fig. 1).
2.
Pull the short side parts up until you can hear a click and it is engaged.
3.
Do the same with the long parts.
4.
After this press the bottom down until it is complete engaged.
5.
Now you can put in the mattress.
6.
By pressing the brakes, you can fix or loosen the wheels (fig. 2).
Bassinet
1.
Put both horizontal struts of the bassinet over the short sides of the bed. Then
push the 4 metal ends of the struts under the edges (fig. 3).
2.
Then push the 4 plastic mountings on the long sides of the bed (fig. 4).
3.
Now you can put the mattress into the bassinet.
To remove it, do it in the reversed order.
10