Electrical Safety - KINZO 25C5030 Manual De Instrucciones

The following symbols are used throughout this manual:
ADDITIONAL SAFETY INSTRUCTIONS FOR COMPACT HOBBY TOOLS
Make sure that the accessories used are suitable for the maximum
I
speed stated in the technical data.
Make sure that the accessories are mounted according to the
I
instructions.
Only use accessories and adapters supplied by the manufacturer.
I
Make sure that sparks cannot hit any persons or set flammable
I
materials alight.
I Always wear safety goggles, hearing protection and if necessary other
protective means, such as working gloves, hard hat, etc.

ELECTRICAL SAFETY

DESCRIPTION (fig. A)
Your compact hobby tool has been designed for drilling, routing,
engraving, polishing, cutting, grinding and sanding of wood, metal,
plastics and stone.
1 On/off switch
2 Speed adjusting wheel
3 Carbon brush holder
4 Spindle lock button
5 Collar
6 Collet nut
46
25C5030_20.p7
Denotes risk of personal injury or damage to the tool.
Do not use the tool on light metal with a magnesium content
exceeding 80%, as this type of metal is flammable.
Always check that the power supply corresponds to the voltage
on the rating plate.
46
25C5030
04-06-2004, 15:29