Loewe DD/DTS L271X Instrucciones De Montaje Para El Kit De Ampliación página 23

Fig. 7
Fig. 8
Fig. 9
Plug the remaining free plugs of the
cable harness (6) into the connector strips
marked by an arrow in fi g. 7.
Replace the screening cover on the signal
board in the chassis.
In fi g. 9 you can see the fi xing of the
cables with adhesive tape on the signal
board screen.
This adhesive tape is not included in
delivery. Please use your own tape, tesa
4688 25mm.
Another cable harness (9) as an adapter
with CINCH sockets is included, use this
accordingly if necessary.
23