Publicidad
Idiomas disponibles
Idiomas disponibles
The bouncer comes disassembled. It consists of
the following:
a) 2 semi-circles
b) Seat support
c) Base
d) Fabric seat
e) Canopy
f) Head and body hugger
g) Toy bar
h) Anti-insect net
ASSEMBLING / DISASSEMBLING
-
Assemble the two semi-circles (a) and the
seat support (b) as shown (1) «click» heard.
-
Fit the structure onto the base (c) as shown
(2) until «click» heard.
-
To remove it, press in the lever located below
the base (2A).
-
Slip the fabric seat (d) onto the frame (3 and
4) and close the press studs (5).
-
Attach the canopy (e) onto the bouncer frame
as shown (6 and 7), close the press studs (8).
WARNING
: Never carry the bouncer by the
canopy.
SEAT ADJUSTMENTS
-
For the child's comfort, the seat is equipped
with a head and body hugger (f).
-
To change the angle of the seat, press
simultaneously on the knobs at either side
of the bouncer until you reach the preferred
angle (9).
PLEASE NOTE! Adjust the angle of the seat
with the bouncer in the fixed position.
PLEASE NOTE! Make sure that the bouncer is
firmly engaged in position.
FONCTIONS
(10)
-
Rotating: blocking system positioned to the
left.
-
Locked: blocking system in the centre position.
-
Oscillating: blocking system positioned to
the right.
ANTI-INSECT NET
-
Place it on the canopy and position the
elastics as shown (11).
(h)
TOY BAR
-
Attach the toys on the bar with velcros (g)
then attach the bar to the bouncer frame as
shown (12 and 13).
PLEASE NOTE! The bar should always be
positioned towards the baby's feet, never
over his head.
WARNING:
Never carry the bouncer by the
bar.
ADJUSTING THE HARNESS AND THE
BUCKLE
(14)
The harness consists of a waist belt and a crotch
strap. It must be well adjusted to fit your child.
PLEASE NOTE! Always use the crotch strap
with the harness.
WARNING:
Never carry the bouncer with
baby in it.
-
To close the buckle: Insert the buckle prongs
into the opposite buckle part until they fasten
together (click heard).
-
To open the buckle: Press simultaneously on
the upper and lower parts of the buckle.
PLACING THE CHILD IN THE BOUNCER
WARNING
: NEVER leave a child alone and
unattended in his bouncer.
-
Open the buckle and place your child in the
bouncer.
-
Adjust the harness to fit him and close the
buckle.
-
Adjust the seat position (cf. section SEAT
ADJUSTMENTS).
CARE AND MAINTENANCE
Wipe the plastic and metal parts of your
bouncer clean with a damp cloth then dry them
immediately. Do not use abrasive cleaning
products.
The textile parts should be hand-washed (do
not machine wash). Use only non-abrasive
washing powder.
DO NOT USE BLEACH.
(refer to care labels sewn on the bouncer).
GB
(15)
17
Publicidad
