Display And Operating Elements - Endress+Hauser RIA261 Manual De Instrucciones

6 Operation
38

6.2 Display and operating elements

➀
➁
ƒig. 7: Display and operating elements
➀ Measured value:
5 digit, LC display, indicated are:
•
Instantaneous numeric measured value (in operation).
•
Dialogue setting up text.
➁ Bargraph:
The bargraph displays the scaled measuring range. It indicates the
instantaneous percentage measured value.
➂ Enter push button (E):
Entry into set-up menu.
•
Selection of operating function in a function group.
•
Saving set-up data.
➃ Selection push buttons (+, -):
•
Selection of a function group within the menu.
•
Setting up parameters and numbers. (If the push button is conti-
nuously held down then the number change on the display increa-
ses).
•
The actual loop circuit current is displayed if the +/- push buttons are
held down in operation mode.
➄ Identification fields:
Additional information can be written into the identification fields.
In order to do so, follow these instructions:
•
Degrease and clean the fields.
•
Write onto the fields using a light and water resistant transparency
pen.
Digital field display
➂
➃
➄