Wiring Diagram - Gabarron TBB 8i Instrucciones De Instalacion Y Uso

3. APPLICATION OF USE
Press this key to turn ON / OFF the towel rail.
Press
temperature, the scale at the top will
show you the temperature level.
Press this key to select the working mode. The LED
mod.
will show you the selection:
auto "auto" mode, only available for installations with FIL
PILOTE. For standard applications this mode is the same
as CONFORT mode.
CONFORT mode. It will keep the selected temperature
level.
ECONOMY mode. It will reduce the CONFORT mode by
3.5ºC

FROST PROTECTION mode. It will keep a minimum
temperature of 7ºC.
This LED will show you that the device is consuming
energy.
By pressing this key more than three seconds,
the keyboard will be locked to avoid accidental
handling. To unlock the keyboard it will be necessary to press
this key again another three seconds.
Press this key one or two times to set up
1h 2h
one or two hours of continuous
performance at maximum heat. After this time
the heater will come back to the previous selected mode. The
timed performance can be also interrupted by pressing again
this key.
It is usual that the extreme bars at the towel heater be at
different temperature than the rest of the bars, this is because
of the internal temperature distribution.
Control panel description
these keys to adjust
4. MAINTENANCE
The towel rail doesn't require any type of special maintenance.
Clean it with a cloth, only when the unit is disconnected and
cold. Do not use solvents or abrasive products when cleaning.
The towel rail is filled with a precise quantity of special fluid.
Any repairs that may require the opening of the towel rail
must only be carried out by the manufacturer.
The towel rail has been manufactured to assured quality and
according to processes to protect the environment. Once at
the end of the useful life of the appliance, take it to a clean
point so that it's materials can be recycled appropriately.

5. WIRING DIAGRAM

Models: TBB8i (300 W)
the
TBB12i (600 W)
TBB17i (900 W)
Voltage: 230 - 240 V~ / Class II / IP 44 / IK 09
HEATING ELEMENT WITH BUILT IN CUT OUT

WARNING: Connect the wires to a fix wall socket or to an
appropriate plug WITHOUT EARTH. Connect the black wire
marked "Fil Pilote" to the signal wire when available. Do not
connect this wire to any EARTH lead.
The symbol on the product or in its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of
this product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product. These instructions are only valid in the
EU member states.
5
EN

ELECTRONIC
CONTROL


 