Parts Identification; Technical Specifications; Installation; Caution - Boxis R510 Manual Del Usuario

https://www.supplychimp.com

2.0 Parts Identification

1-LCD Panel (Figure 1)
2-Soft push button control panel
• Start
• Stop
• Reverse
• Forward
• Maintain
• Lock
• Unlock
• Security key no. with Enter and Cancel
3-Doors for paper tray
4-Rating plate
5-Power ON/OFF switch
6-Power socket
7-Cabinet
8-Cabinet access door
9-Paper feeding opening
10-Waste basket
11-Locking/Unlocking Key
9
1
2
7
8
10
LCD Panel
Figure 1
Soft push button
control panel
3
4
5, 6
11
Figure 2

3.0 Technical Specifications

Model R510
Cutting style Confetti Particle Cut
Shred Size 3 mm x 20mm
Sheet capacity 500-sheet autofeed
6-sheet manual feed
Speed 64 mm/s
Intake throat width 240 mm
Motor power 0.4 hp
Voltage 120V / 60Hz
Dimension (L x W x H) 545 x 430 x 910 mm
Weight 52 kg
Receptacle volume 83 liters
Noise level In idle < 60dB(A)

4.0 Installation

• Refer to set-up instructions printed on carton box for proper assembly.
• Operate this product only from the type of power source indicated on the
marking label.
• Install the paper shredder so that the plug is easily accessible.
• Shredder must be operated only in upright position.
• Set up paper shredder so that the ventilation slots are unobstructed. To ensure
sufficient ventilation of the shredder a minimum distance of 5cm to the wall or
to furniture must be maintained.

5.0 Caution

Never insert hand, fingers or any foreign objects into the feed opening. Serious
injury may result.
Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects
away from feed opening. Injury may result.
Always turn off and unplug the machine before moving, servicing, cleaning or
any other conduct other than normal operation. Serious injury may result.