General Safety Instructions - Clatronic HAS 2386 TS Instrucciones De Servicio

26120-05-HAS 2386 TS 29.03.2001 15:58 Uhr

General safety instructions

GB
• Before commissioning this device please read the instruction manual carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and,
if possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use,
when attaching accessory parts, cleaning the device or whenever a disturban-
ce occurs. Switch off the device beforehand. Pull on the plug, not on the
cable.
• In order to protect children from the dangers of electrical appliances, never
leave them unsupervised with the device. Consequently, when selecting the
location for your device, do so in such a way that children do not have access
to the device. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any
kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp
edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are
not using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors.
• Under no circumstances must the device be placed in water or other liquid, or
come into contact with such. Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the
socket immediately. Do not reach into the water.
• Use the device only for the intended purpose.
Special safety instructions for this device
• Keep the device away from water and moisture such as, for example, bath
tubs, shower areas or even persons taking a bath! Such situations constitute a
DANGER TO LIFE! through electric shock.
• Attention: The nozzles become hot during operation.
12
Seite 12