Clatronic CDP 604 MP3/VCD Instrucciones De Servicio página 68

5....-05-CDP 604 neu
OPEN (10):
GB
DC 4,5V (12):
AV OUT (13):
PHONES (14):
VOLUME (15):
CHARGE
ON/OFF (16):
Infrared remote control
This is used for controlling the device without a cable connection from a distance of
up to five metres. If the range decreases, the batteries need replacing. Please
ensure that there are no objects blocking the direct path between the remote con-
trol and the infrared receiver of the device.
Switching Off
Switch the device off by pressing the
once, or twice if the device is running. Alternatively, do not operate the device for 10
seconds.
II Playback/
Pause (1/3):
STOP/OFF (2/4):
I PREV (3)/
I NEXT (4):
68
15.06.2004
For opening the CD compartment.
For connecting to the mains adapter.
For connecting to the television set with a video input
socket. Please insert the black plug into the socket of the
CD player, the yellow plug into the video input socket, the
red plug into the right-hand loudspeaker input (R) and the
wide plug into the left-hand loudspeaker input (L) of your
television set.
For connecting to the headphones or earphones.
This is used to control the volume (19/23 on the remote
control). In VCD mode this can only be adjusted using the
remote control or on the television set itself.
Switches on the charge function when the external power
unit is connected. Please ensure that there are no batteries
inserted into the battery compartment, as otherwise there is
a danger of explosion! Only the correct rechargeable batte-
ries should be used!
Note: Please use the charging sleeve supplied to make the
contact with the battery.
STOP key (2) (4 on the remote control)
CD Keys
Playback can be briefly interrupted. If the key is pressed
again, playback continues from the same position.
Die CD is stopped. Pressing again switches the device off.
With these keys is possible to jump to the next or previous
track. Keeping the key pressed starts the music search fun-
ction.
14:19 Uhr Seite 68