List Of Parts; Putting Into Operation - Clatronic Profi Cook UM 2906 Instrucciones De Servicio

1. Ensure that the rotary switch is in the „0" position and that the mains lead is
not in the socket.
2. Check the decanter. The blade block, the cover disc and the gasket must be
mounted in the right order.
See „Overview of Components".
3. Place the carafe on the motor housing. The carafe must be positioned in such
a way that the safety pin fi ts exactly on to the safety switch in the housing.
4. Connect the mains lead to a properly installed 230 V, 50 Hz safety power
socket.
5. Cut the food to be mixed into small pieces.
6. Transfer the ingredients to the carafe and put the lid in position. The lid must
be positioned fi rmly. Please hold the carafe fi rmly during mixing.
7. For constant mixing (continuous mode):
When operating in levels 1 or 2 snap the selector into the desired position:
Shift the selector to „0" to switch off the appliance.
8. For pulse mode (mixing at brief intervals) shift the switch to „0" position. The
switch snaps into place. The appliance is off now. Turn the switch now to
position „P". The switch must be kept in this position for the desired interval.
When the switch is released, it returns automatically to „0" position.
9. Note: Please note that you can only use the maximum fi lling amount of 1.250
ml for creamy liquids such as for puréeing potatoes, carrots or tomatoes. If
there is water content, please note that the fi lling amount is max. 800 ml.
Caution: If overfi lled there is a danger of spilling over.
5....-05-UM 2906 Profi Cook 33

List of Parts

1 Filler lid
2 Lid
3 Carafe
4 Knife block
5 Sealing ring
6 Covering plate
5 Sealing ring
8 Motor housing
9 Rotary switch

Putting into operation

Level 1 = low rpm
Level 2 = high rpm
GB
33
26.08.2004, 14:19:54 Uhr