Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical Connection
GB
•
Ensure that the machine is switched off (all operating switches on „MIN").
•
Before inserting the mains plug into the socket check whether the voltage
which you intend to use corresponds to that of the machine. Please see the
label on the machine for details.
•
Only connect the machine to a correctly installed safety socket, 230 V/50 Hz.
•
Adjust the temperature control to the desired temperature. The red control
lamps light up.
•
Once the set temperature has been reached the control lamps go off. During
operation the control lamp goes on from time to time to show that the correct
temperature is being maintained.
Use of the Hot Plates
1. Only use saucepans with a fl at bottom in order to make optimum use of the
energy (see diagram 1).
2. The saucepan should never be smaller than the hot plate. This wastes energy.
In extreme cases the hot plate may deform.
3. Set the temperature control according to what you intend to do:
Level MIN:
Level 1:
Level 2:
Level 3:
Level 4:
Level MAX:
Switching-Off
The machine is switched off if all switches are in position „MIN". Then remove the
mains plug.
30
Operation
Off
Keeping warm/continued cooking
Continued cooking
Frying
Parboiling, gentle roasting
Roasting, rapid heating
Publicidad
Tabla de contenido
