TrekStor i.Beat sweez Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
) Logging off and disconnecting the TrekStor
Windows® 98 (SE) / 2000 / ME: Click in the lower right of the task bar, on the symbol "s
In the "s
Afely reMove hArdwAre
disconnect the i.Beat sweez from the PC.
Windows® XP: The i.Beat sweez can be disconnected from a PC without logging off.
Note: Please follow the recommended logoff procedure to prevent damage to the device or data loss.
6) Firmware update for the TrekStor
Warning: Please read all the instructions, and follow the update procedures exactly to keep from damaging the
i.Beat sweez.
a) Connect the i.Beat sweez to a USB port of your PC.
b) Back up all the important files on your i.Beat sweez onto your PC.
c) You can update the i.Beat sweez with the most current firmware from the internet (on the TrekStor
homepage at http://www.trekstor.de).
d) Insert the provided CD into your CD / DVD drive. If the startup function of your system is activated, a
menu showing all the contents of the CD will open.
Note: If the startup function of your system is deactivated, you can access the CD / DVD drive via "M
and start the program "
e) Select "f
" and follow the instructions. Your internet browser opens, and the TrekStor homepage is
irMwAre
loaded.
f ) Download the firmware (*.zip-file), and unzip it to a folder of your choice.
g) Start the "
.
" file to install the software for the firmware update on your PC. Follow the installation
setup
exe
instructions.
h) Select "s
"
"p
+
tArt
rogrAMs
the update program.
i) Please wait until the update procedure is completely finished.
j) Next disconnect the i.Beat sweez from the USB port of your PC.
7) Using the TrekStor
Turning the device on and off
Turn the i.Beat sweez on by pressing the
off, hold the
button for approximately  seconds.
A
Note: Make sure that the
s
If the button lock is activated, the button lock symbol or a corresponding message will appear.
Different modes
The i.Beat sweez has different modes. To go to a mode, hold the
1 second. Push the joystick to the left
ing the
joystick. Leave the menu by pushing the joystick up
*
" window, select the i.Beat sweez and click on the "y
" in the main directory of the CD.
.
Menu
exe
"
"t
s
.b
+
reK
tor i
eAt sweez
i.Beat sweez
button for approximately 1 second. To turn the i.Beat sweez
A
switch has been moved to the left position, i.e., that the button lock is turned off.
or right
E
i.Beat sweez
i.Beat sweez
" to run the "f
u
irMwAre
joystick button for approximately
*
to select the desired mode, and confirm by press-
F
or pulling it down
Q
– 11 –
from the PC
Afely reMove hArdwAre
" button. You can now
es
y
". Follow the instructions of
pdAte
.
R
".
EN
"
c
oMputer

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

I.beat sweez fm

Tabla de contenido