Clock And Date Adjustment - Premier BP-4716 Manual De Instrucciones

LCD DISPLAY FOR TAKING BLOOD PRESSURE
After you are in a comfortable position, press the "ON/OFF" button. The device will verify itself showing
all "8s", then LCD will show "00".

CLOCK AND DATE ADJUSTMENT

★ When the monitor is turned off, press ON/OFF and the
'MEMORY' buttons for 3 seconds at the same time.
The number of the year will blink on the LCD display.
When the MEMORY button is again pressed and released,
the month will blink. Repeat the process and the day
of the month, the hour and minute will blink.
★ When the number that you wish to set is blinking, each
time you press and release the 'MEMORY' button, the
number will increase by one for the year, month, day, hour or
minute.
Note: The hours are displayed as 1 through 24
Rather than 12 AM hours and 12 PM hours
★ When you again press and release ON/OFF button, you
exit the time, and date adjusting mode. The numbers on the
LCD display will then turn off.
★ When batteries are replaced, the time and date
must be reset.
IRREGULAR HEARTBEAT INDICATOR
If an irregular heartbeat is detected, the Irregular
Heartbeat symbol will appear and blink
in the display window.
READING AN AVERAGE OF THE THREE
MOST RECENT MEASUREMENTS (AUG)
★ When the monitor is turned off, press and reléase the
MEMORY button. The LCD will display 'AUg' symbol on the right up corner of the monitor.
★ Each time that you again press and release the 'MEMORY' button, the data will appear on the LCD
display.
DELETING MEASUREMENT FROM THE MEMORY
Press and hold the 'MEMORY' BUTTON until all numbers change to 'ZERO'.
P-5