BIG ASS FANS BAFCon Guia De Instalacion página 5

WARNING: Disconnect power to the installation locations before
installing the fan and controller!
1. Install fan and route cable to controller
Install the fan according to the fan installation guide. Make sure the CAT5
controller cable from the fan's VFD is routed to an outlet box at the controller
installation location.
2. Separate mounting bracket and plate
Remove the four screws
securing the mounting
bracket to the mounting
plate and set them aside.
You will use them to
reattach the bracket to the
plate after mounting the
plate to the outlet box.
3. Install mounting plate
Attach the mounting plate to the outlet box with the provided hardware.
Make sure to use the appropriate screw type for your outlet box. Your outlet
box and mounting hole confi guration may diff er from the illustrations.
The mounting plate can be installed in any orientation, and any of the
mounting slots can be used.
Rectangular Outlet Box
INSTALLATION
6-32 x 1" Truss
Head Screw
Square Outlet Box
8-32 x 1" Pan
Head Screw