Descargar Imprimir esta página

Federal Signal Corporation 300GC Instrucciones Para La Instalación página 3

Ocultar thumbs Ver también para 300GC:

Publicidad

Idiomas disponibles

Idiomas disponibles

II.
SPECIFICATIONS.
Operating Voltages:
Supervisor Voltage:
Current Requirements:
300GC & 300GCX:
302GC & 302GCX:
Weight
300GC:
300GCX:
302GC:
302GCX:
Construction
Amplifier Housing:
Speaker Cone Tip & Projector:
Sound Level on Axis @ 10 feet [3m]:
Approval Agency Listings:
Compatible Tone Modules:
Compatible Speaker Connector Cards:
III.
INSTALLATION.
A. Unpacking.
After unpacking the speaker, examine it carefully for possible damage that
may have occurred in transit. If equipment has been damaged, immediately file a claim
with the carrier stating the extent of the damage. Carefully check all shipping labels
and tags for special instructions before removing or destroying them.
B. Mounting Arrangements (see figure 1).
To maintain the Hazardous Location ratings of the Models 300GCX and
302GCX enclosure, do not use the 7/8" knockout (concealed conduit mount‑
ing.)
24V AC/DC, 120VAC, 240VAC
50VDC (When speaker plug‑in module is
installed.)
24VAC ‑ 1.1A max.
120VAC ‑ 0.3A max.
24VAC ‑ 1.7A max.
120VAC ‑ 0.4A max.
24V AC/DC
4.5 lbs. [2.0kg]
4.9 lbs. [2.2kg]
6.1 lbs. [2.8kg]
6.5 lbs. [3.0kg]
Die‑cast aluminum alloy with powder coated
finish. Housing sealed with a neoprene rubber
gasket. External mounting bracket on Models
300GCX & 302GCX.
Spun aluminum alloy with powder coated
finish.
300GC & 300GCX: 110dBA
302GC & 302GCX: 114dBA
Refer to product nameplate
TM2, TM33*, or UTM
* ‑ Series A and B versions of the TM33
module are not compatible.
AM25CK*, AM70CK*, EM3, 300CK,
E‑300CK, T‑300CK, or 300CKS
* ‑ Series A versions of these connector cards
are not compatible.
-2-
24VDC ‑ 1.1A max.
240VAC ‑ 0.2A max.
24VDC ‑ 1.7A max.
240VAC ‑ 0.2A max.
120VAC, 240VAC
5.5 lbs. [2.5kg]
5.9 lbs. [2.7kg]
7.5 lbs. [3.4kg]
7.9 lbs. [3.6kg]

Publicidad

loading

Este manual también es adecuado para:

300gcx302gc302gcx